Small Business Loan Victoria

Small Business Loan  Victoria -  Starp Up Business Loan A business loan can help you make your next purchase, fund growth, or manage cash flow for your business. But before you apply for one, you’ll need to work out which loan best suits you.

1. Understand your loan purpose
Being clear on why you want to borrow is the first step to choosing the right loan and it’s one of the first questions you’ll be asked by a lender.

Common reasons for taking out a business loan include:

  • Managing your cash flow
  • Funding your growth
  • Buying a vehicle or equipment for your business

2. Work out the loan amount
If you’re looking to borrow to buy an asset, knowing the amount you need will be reasonably straightforward. However, if you’re borrowing to cover a potential cash shortfall, working this out can be a little more involved.

3. Calculate what you can afford to repay
The length of the loan will impact your repayment amounts. Your lender can outline the different loan term options in detail. But before you have this conversation, work out what you can afford to repay each month. You can do this by looking at your business’ past financials and completing cash flow forecasts.

4. Decide between a secured or unsecured loan
You’ll usually be able to choose to have your loan secured or unsecured. Each has its benefits as well as considerations.

Secured

  • You offer an asset for the loan, such as property
  • The interest rate will usually be lower than unsecured
  • The lender may sell your asset if you’re unable to repay the loan
 
Unsecured

  • No asset is offered
  • The interest rate is usually higher
  • It can sometimes be more difficult to be approved for an unsecured loan

 

5. Choose a fixed or variable interest rate
As with other types of loans, you’ll often have the choice between a fixed or variable interest rate for your business loan. A variable rate may suit you best if you’re confident you can repay the loan even if rates increase. A fixed interest rate may be more appropriate and help manage your cash flow better by providing certainty with your repayments.

6. Understand the fees and charges
Make sure you understand the true cost of any loan by comparing all the fees and charges. Some fees you may be charged include:

  • Establishment or application fees
  • Ongoing monthly fees
  • Early repayment fees
  • Exit fees
  • Valuation fees (if you choose to secure your loan)

7. Get your paperwork ready
Preparing your business documents is an essential step that could help the lender make a decision sooner. Check out our guide to what information you’ll need to apply for a business loan.

8. Speak to an expert
A CommBank business banker can call you to discuss in more detail which business loans may suit you and answer any questions you may have.

commbank.com.au

Victoria Car Insurance Best Insurance

Victoria Car Insurance - Why Victorian drivers need car insurance
From the bottlenecks of St Kilda Road, to the potholes of the Hamilton Highway, and the country roads that connect our regional centres, Victorians encounter a diverse range of driving experiences whenever they hit the road.

You might be a safe, responsible car owner with a great driving record – but it’s not just about you. Our ever-changing weather conditions, other motorists, and a range of factors like speed and road conditions, mean that accidents can – and do – happen.

Having great value car insurance in Victoria gives you peace of mind in the event of theft, damage or accidents – whether you drive country roads, city streets or both.

Real Insurance for real Victorian drivers

At Real Insurance, we understand that you want car insurance that offers value and protection that suits how you live and drive in Victoria.

Drivers living in Melbourne city or other large centres like Sunbury, Melton or Werribee are faced with increased traffic, on-street parking, and all the associated challenges that come with residing in a busy urban area. Your car might be parked for much of the week while you catch public transport, or you might take longer drives on the weekends.

If you live in a regional area like Geelong, Ballarat or Bendigo, you know that driving long distances is a fact of life. You could be driving on highways or dirt tracks as well as suburban streets. You might travel long distances each day, or just use your car for trips to the local shops or to visit family and friends.

No matter when or where you drive, we’ve got a car insurance product that offers great value and protection in the event of accidents, theft or damage to your vehicle.

Real Insurance Options

At Real Insurance, we offer a range of car insurance products from our award-winning Pay As You Drive Insurance, to our Comprehensive Car and our Third Party Property Fire & Theft or Third Party Damage Insurance.

Discover and compare car insurance products to learn how Real Car Insurance protects you in the event of an accident, theft or damage.

Even more protection

You can upgrade your car insurance to include any or all of these great optional extras for increased peace of mind:

Real Roadside AssistanceTM
Excess Free Windscreen Cover
10 or 20 Day Hire Car Cover
For full details including limits and exclusions of these benefits, please read our Product Disclosure Statement.

Got questions? Find answers with our helpful Car Insurance Q&A.

Why choose Real Insurance
Save up to 10% when you buy online1
Flexible payment options
24/7 claims lodgement and emergency assistance
We don’t have assessment centres, we use everyday repairers
Real Insurance is a multi-award winning insurance company
Get Real. Get a Quote
From Wodonga down to Warrnambool, and Mildura right through to the Mornington Peninsula, if you’re a driver in Victoria, we’ve got you covered. Get a real quote, real quick. Call us on 13 19 48 or get a fast car insurance quote online.

Lasik Victoria As dedicated Victoria LASIK providers

Lasik Victoria As dedicated Victoria LASIK providers, Dr. Joseph King takes great personal satisfaction in helping patients turn their less-than-perfect vision into clear eyesight. Read on to learn how LASIK eye surgery can help you realize your vision correction goals.
 

TRUST THE VICTORIA LASIK EXPERTS

Dr. King’s laser eye surgery Victoria offices feature the latest laser eye surgery technologies. Dr. King and his team use various diagnostic instruments (such as the advanced WaveScan platform) to detect even the smallest corneal irregularities. The end result of this thorough diagnostic workup is a 3-D map of the patient’s cornea. Just like a fingerprint, this map is unique to each individual. Drs. King and Ma use the 3-D corneal map to develop an extremely precise Victoria LASIK treatment plan designed to correct the patient’s nearsightedness, farsightedness, or astigmatism.

The team is pleased to offer one of the latest laser eye surgery procedures – the comprehensive iLASIK treatment. iLASIK is a highly individualized laser eye surgery procedure that combines WaveScan diagnostics, the VISX Star S4 excimer laser platform, and the IntraLase femtosecond laser for blade-free corneal flap creation. By skillfully using all of these technologies, Dr. King helps ensure that his Victoria LASIK patients permanently reduce or eliminate their dependence on corrective lenses.

COMPREHENSIVE PATIENT CARE

In addition to sophisticated laser treatments, Dr. Joseph King also offers comprehensive patient care. His Victoria LASIK medical team carefully prepares each patient for his or her procedure by explaining what will happen during surgery and what the recovery will be like. After the surgery is completed, the medical team remains in close contact with their patients to address any concerns and provide medical assistance, if needed.

WHAT ARE THE ADVANTAGES OF HAVING LASER EYE SURGERY?

 

Laser eye surgery with LASIK is designed to improve the vision of individuals that suffer from nearsightedness, farsightedness, and astigmatism. The most important advantage of having laser eye surgery is freedom from reliance on glasses and contact lenses. The results appear quickly and are long-lasting — few patients need additional treatment or “touch-ups” after LASIK. The recovery period is very short, and most patients return to work quickly after surgery.

King LASIK
201-3550 Saanich Road
Victoria, BC V8X1X2 Canada
(250) 360-2141

HOW SHOULD I PREPARE FOR LASIK?

 

There are a few things you should do to prepare for LASIK:

Take out hard and soft contact lenses a few weeks prior and wear glasses in the meantime.
Continue to take your medications as normal, unless our doctor advises otherwise.
Plan to take two or three days off from work for surgery and your recovery.
Don’t wear any makeup, lotions, or creams on the day of surgery.
Make arrangements for someone to drive you to and from surgery and stay with you overnight.
Fill any prescriptions.
 

WHAT QUALITIES SHOULD I LOOK FOR IN A LASIK SURGEON IN VICTORIA?

It’s essential that your LASIK surgeon has experience. Ideally, you want a surgeon that has performed tens of thousands of laser eye surgeries. There is no substitute for experience. Also, your surgeon should use advanced technology. The right technology enhances the precision and safety of treatment and patient outcomes. Finally, the surgeon you select should make you feel comfortable. For a positive experience, look for someone that makes you feel well-cared-for.

You can find a Victoria LASIK surgeon with all of these qualities (and more) at King LASIK. Contact us today to schedule an appointment to meet our surgical team.

WHAT SHOULD I EXPECT AFTER LASIK?

You may feel a little groggy immediately after LASIK, and your vision may be blurry. You will not be able to drive yourself home from surgery, so you should arrange a ride ahead of time. Your eyes may feel mildly irritated for the rest of the day. Most people sleep as much as possible. When you wake up the day after surgery, you most likely will notice a substantial improvement in your vision, with results continuing to improve over the next few days.

IS LASIK SAFE?

LASIK has a very safe track record. Leading-edge technology is used to reduce the risks, which occur rarely. In the event of a complication, the problem generally appears quickly and can be addressed immediately. However, most patients do not need to worry about complications.

WHAT ARE SOME ACTIVITIES IN VICTORIA TO ENJOY AFTER LASIK?

You won’t run out of fun activities to enjoy in Victoria after your LASIK surgery. Walk around and see the sites on the Inner Harbour or Beacon Hill Park. Visit the Royal BC Museum or Craigdarroch Castle to brush up on your history. If you’re a marine animal lover, take a dolphin or whale-watching tour. A shopping enthusiast? Visit Government Street for a walk and some retail therapy. Vancouver Island Brewery is a wonderful spot to tour and find your next favorite craft brew.

Source : kinglasik.com

Victoria Golf Club Brisbane

Victoria Golf Club Brisbane - The Victoria Park Golf Course will be permanently closed to create Brisbane's biggest public park in almost half a century.

The plan was welcomed by Brisbane's opposition Labor councillors, who argued they had been calling for a rethink of golf courses for at least a year.
On Sunday, Brisbane lord mayor Adrian Schrinner announced the council-owned inner-city golf course would be transformed into a 45-hectare park.

"When you think of some of [the] great parklands across the globe, Central Park in New York City, Lumpini Park in Bangkok and Hyde Park in London come to mind for their hundreds of trees, free attractions and for offering people a green sanctuary within a busy capital city.

"About 26 hectares of this council land is currently used as a pay and play public golf course, which over recent years has seen a decline in patronage and a reduction in revenue."

Labor councillor Kara Cook said the transformation was a good idea but called for the park to be delivered on time and on budget.

"We've been calling for a rethink on golf courses across the city for at least the last 12 months," she said.

" ... The LNP have said that the ALP was waging a war on golfers. If that was a war, this [closing Victoria Park Golf Course] has got to be armageddon."

In June 2018, Cr Cook questioned a $17 million commitment to the Cannon Hill Community Links Golf Course, which she said Labor would instead spend on lifestyle and community services that would benefit "all of Brisbane".

"Council already owns two golf courses and the cost to ratepayers is enormous compared to the few who benefit from them," she said last year.

In response, councillor Matthew Bourke accused Cr Cook of "declaring war on golf and golf lovers across this city".

"The 257,000 people who go to our public golf courses, apparently, is a small number," he said.

"We see significant usage of our golf courses and ... we will continue our investment into those spaces."

Council has allocated $1 million in 2019-20 for community consultation and design for the new park, with work due to begin in 2021.

"Other successful parklands across Brisbane have pop-up cinemas, different types of markets, community events and include revolutionary play areas for all ages," Cr Schrinner said.

"These are all options we will explore with the community."

Cr Schrinner said the council would work with the current tenants on the project to ensure the function centre, wedding venue, putt putt course and driving range were part of the new parkland.

When completed, the new park will be more than double the size of the City Botanic Gardens.

The council also owns the St Lucia Golf Links.  The new public golf course at Cannon Hill is due for completion by the end of 2021.

Source : brisbanetimes.com.au

Situated just two kilometres from Brisbane's Central Business District, Victoria Park Golf Complex is an inner city sanctuary and home to truly amazing experiences. Facilities include:

Putt Putt


Victoria Park's 18-hole mini golf Putt Putt course is jam-packed full of fun and is like no other you’ve experienced before. Open morning until night every day.

Driving Range


Victoria Park's all-weather, two level Driving Range includes 53 hitting bays and a grass hitting tee and target greens. It’s fully licensed, is open morning until night every day.

Golf Learning Centre


Victoria Park's Golf Learning Centre features seven coaching bays equipped with the latest technology.

Kid's Playground


Victoria Park's Playground hosts equipment for kids aged 3 to 12 including a slide, climbing ropes, farm tractor, rock climbing wall and imaginative play areas.

Restaurant Dining


The Victoria Park Bistro offers stunning views of the Brisbane city skyline, free on-site parking, and a seasonal menu which showcases local flavours.

Special Events


Victoria Park also features an award-winning function venue. Their eight function spaces offer an impressive wow factor with views of the spectacular Brisbane city skyline and Victoria Park Parklands.

Source: queensland.com

Victoria Golf Club Membership Fees

Victoria Golf Club Membership Fees - Golf Australia chief executive officer Stephen Pitt said private clubs were looking at how they could make membership more attractive and ''less painful'' financially.

''Clubs are looking at working out payment plans for people to join so they're not slugged upfront,'' Mr Pitt said. ''They're also looking at trying to attract players aged from 18 to 30.''

The Victoria Golf Club, home to this year's Australian Open, has halved its $10,000 joining fee for players aged up to 30. The concession rate previously applied to golfers aged 25 or under. The club's general manager, Peter Stackpole, said most other private clubs were doing the same.

Commonwealth Golf Club general manager Peter Parks said many members had transferred to restricted memberships to save money and spend more time with their families.

''They said if you're like me and you're 40 and you've got three kids under the age of five, it's hard to get your regular game in so something's got to give. You've got to put golf on hold.''

Falling membership at the Long Island Country Club in Frankston saw its board drop the $2000 entrance fee.

General manager David Smith said the club's amnesty on the entrance fee from September to the end of next month had resulted in 150 new members.

One golfer to take advantage of the offer, Mike Ward, 71, from Mornington, said he signed up after seeing an advertisement in his local paper.

''I was very happy. It's a real good deal to get the chance to play on what is a championship course and not have to pay any entrance fee,'' Mr Ward, a retired boilermaker and welder, said.

Kingston Heath Golf Club general manager Gregg Chapple said he had heard that some clubs were having challenging times but his club had a waiting list of three to four years.

''We certainly haven't felt what others have felt but I suppose when you've got the momentum of having the world's greatest golfer coming to play at your place, you become somewhat shielded,'' Mr Chapple said. Tiger Woods won the Australian Masters at Kingston Heath in November.

Metropolitan Golf Club general manager Allan Shorland said the financial crisis had affected the number of new members signing up but he claimed his club still enjoyed ''healthy demand'' for memberships.

Royal Melbourne Golf Club's Christian Tanner said the club, which has a $10,000 joining fee and an annual $3500 membership fee, had managed to maintain its numbers because of its prestige.

Women's Golf Victoria chief executive Bronwen Young said she thought the drop in female members of private clubs was as much to do with generational trends as finance.

''The younger generations are not clubby-type people and don't see the value in belonging to one club and playing only one course regularly,'' she said.

According to the Ausgolf website, private clubs are institutions that are ''valued and jealously guarded by their members in much the same way as one protects the family home''.

The Huntingdale Golf Club, for example, claims to have a 12 to 15-month waiting list, with a requirement that applicants know at least four members to gain entry.

The club has, however, recently introduced a sponsorship program to try to boost numbers whereby an applicant who does not know a member can be interviewed by the club president and captain to determine their suitability.

Paying to play
 

What it costs to play at Melbourne's most exclusive courses:

■ Commonwealth: Entrance fee - not disclosed. Waiting list: 1-2 years.

■ Huntingdale: Entrance fee - $10,000. Waiting list: 12-15 months.

■ Kingston Heath: Entrance fee - not disclosed. Waiting list: 3-4 years.

■ Metropolitan: Entrance fee - $5000. Waiting list: open.

■ Royal Melbourne: Entrance fee - $10,000. Waiting list: 10 years plus.

■ Victoria: Entrance fee - $10,000. Waiting list: undisclosed.

Source : watoday.com.au

The Victoria Golf Club
Course Opened – 1927
Designer – William Meader, Oscar Damman, Dr Alister MacKenzie

Melbourne businessman William Meader is considered the forefather of Victorian golf, having helped establish the state’s Golf Association in 1902 and founding the Victoria Golf Club at Fishermen’s Bend the following year. Meader was later the driving force behind the move to Cheltenham and in 1923, with club captain Oscar Damman, laid out the current course. Construction was hampered however by bad weather and problems with site access but the delay proved a blessing as it allowed travelling architect Dr Alister MacKenzie to advise on the bunkering of the unfinished course.

Clearly impressed MacKenzie told the club that ‘little more is required to make this a magnificent golf course’ and then proceeded to add finishing touches to the existing routing by mapping bunkers and suggesting a few green changes.

Perfectly situated in the heart of the Melbourne Sandbelt and across the road from Royal Melbourne, the layout these three men created is outstanding with a collection of fine holes falling beautifully across the naturally undulating terrain. Fairways are forgiving yet place a premium on preferred driving lines while the green sites are brilliantly contoured and original. The style of design together with the shape of MacKenzie’s bold bunkering, the slope of the land and use of native vegetation is somewhat reminiscent of Royal Melbourne albeit on a slightly smaller scale.

The central and southern sections of the site are the highlight particularly holes 9 through 13, which take the golfer on an absorbing journey through the most interesting undulation on the course. The long 9th is a classic Sandbelt par five running across the tumbling hills while the wonderful short 10th, described by MacKenzie in 1926 as ‘a fine drive and pitch adventure’, features a dipping, sweeping fairway and sublime green site.

Falling away toward the southwestern corner of the property, the charming 12th finishes little more than a wedge from Royal Melbourne and is followed by the best par four on the course, which heads blind over a rise and then into an elevated green from a down-sloping fairway.

Many believe Victoria’s greatest weakness is the configuration of holes as each nine closes with back to back par five’s. Despite being an unusual arrangement the 9th and 17th are both world class while the famous short 18th provides a stirring finish with many matches decided on its enormous front to back sloping green. Like most holes at Victoria gaping MacKenzie sand traps strategically line the approach to the green and dominate the vista from the top of the fairway.

Although some down play MacKenzie’s influence at Victoria, it is impossible to deny that his superb bunkers define the character of the course. Identifying a weakness in the Australian game MacKenzie actually boasted during his visit that his scheme of bunkering would help raise the standard of golf by ‘stimulating the scratch man to improve his game’. This prophecy was most famously realised at Victoria, which began producing champion golfers almost the moment he departed.

During the 1980’s one such member, five-time British Open champion Peter Thomson, was responsible for one of the only significant course changes when he raised the green on the driveable 1st hole. More recently the club sought to regenerate the layout after years of slow deterioration by employing local architect Michael Clayton to oversee the renovation of the original bunkering. Referring back to an old black and white aerial shot of the course taken shortly after the 1927 opening, Clayton expertly and faithfully restored the famous MacKenzie hazards to their former glory.

Careful to preserve the subtlety and integrity of the original design some minor tweaking also took place in preparation for the 2002 Australian Open. A number of holes 5, 9, 17 and 18 were lengthened and alterations made to strengthen the par five finishing holes. The bunkering and mounding around the 17th green was reworked significantly while the 18th tee was extended, the landing area tightened and greenside bunkers enhanced. These modern changes were relatively minor and have been generally well received.

Long regarded as one of our elite courses Victoria today exists as a tribute to the hard-working pioneers who laid the clubs foundations, and the divine contribution of Dr MacKenzie who helped shape a very good golf club into a truly great one.

Source: ausgolf.com.au

File Blender 0.18 Extensible File Converter and Processor

INTRODUCTION
File Blender is an extensible and customizable file conversion and processing tool.It uses external command line programs to convert or otherwise process files that are being dropped onto the interface.

You can easily extend its functionality by adding any program that supports command line arguments to its Actions folder, along with a simple configuration file that tells Flie Blender which files should be handled by each action and how.

File Blender requires no installation. The application itself is built of a single executable and a configuration file.

File Blender is freeware and was developed with AutoHotkey (http://www.autohotkey.com)

GETTING STARTED

The default File Blender download comes with several Action packages already configured and fully functional.

To see how it works:
1. Drag an image file or an MP3 file onto the interface (you may drop several files at once).
2. Depending on the file type you have dropped, File Blender will show you an additional menu with options (Actions). Press one of these actions to continue.
3. Some actions may provide you with further options. For example, if you drop an image and choose the Convert... option, you will be prompted to select an output format.

To see a list of supported file formats and for more options, right click the main interface.

ADDING / EDITING ACTIONS
All the actions that File Blender can perform are located in the Actions folder. Each sub folder contains configuration files (named like "MP3 to WAV.b.ini").

When the Actions menu is open, you may right click the action button to gain quick access to the configuration file.

A typical configuration file may look like this:

[action]
name =Convert Image
acceptFormat =JPG,BMP,GIF,PNG
acceptMulti =true
acceptSingle =true
outputTo =out
commandLine ="~Var:ThisDir~\exe\i_view32.exe "~Loop:InFilename~"
"out\~Loop:NameNoExt~.~Gui:SelectFormat(JPG,PNG)~"

For a deeper understanding on how to set up your own actions, open the Guide file in the Actions\_sample folder.

ACTION PACKAGES (PLUGINS)

File Blender comes with some actions already configured and ready to use. If you wish to remove any of these actions, simply delete its folder or file from the Actions folder.

You may also download a plain (no actions) version on the File Blender homepage.
  • Image Conversion - Package: IrfanView. This Action package provides image conversion functionality. Supports BMP, PNG, GIF, JPG, TIF and more
  • Audio Conversion - Packages: OGG, FLAC, Lame MP3, More Audio. These packages provide conversion to and from OGG, FLAC and MP3
  • PDF/TIFF Split and Join - Packages: PDFtk, IrfanView. These packages provide support for splitting multipage PDF/TIFF files and for joining single PDF/TIFF files into a multipage document.
  • JS/CSS Minification and Obfuscation - Packages: JSMIN, YUI CompressorThese packages compact your CSS and JavaScript file, and optionally makeyour JavaScript less readable to protect your code.

H2testw - Fix Your USB!

H2testw was developed to test USB sticks for various kinds of errors. It can also be used for any other storage media like memory cards, internal and external hard drives and even network volumes.

The executable file H2testw.exe needs no installation and can be directly run. It was developed for Windows XP and Vista. It should also work under Windows 2000 but was only tested on XP and Vista. Windows 9x/ME is not supported. You can use the older command line program H2test under these operating systems.

The function of H2testw is quite simple: It fills the chosen target directory with test data and then reads it back and verifies it.

H2testw does not overwrite or erase any existing data. It doesn't do any low-level tricks so administrator privileges are not required. If your hardware is working properly H2testw will not harm anyexisting data.

BUT: _If_ the hardware is defective then H2testw is designed to find that defect and might as a side effect damage existing files. Therefore: IF YOU SUSPECT A USB STICK OR OTHER STORAGE MEDIA TO BE DEFECTIVE, EMPTY IT AND TEST IT COMPLETELY WITH H2TESTW. Only empty media can be fully tested with H2testw. In order to be able to reproduce the results we recommend to format the media (quick format will do) and then test it.

H2testw writes files of up to 1 GByte to the chosen destination and names them 1.h2w, 2.h2w, 3.h2w and so on. If the target directory already contains such a set of files H2testw will offer to verify them. If there are any other files named *.h2w it will refuse to work. In that case please erase all files *.h2w and hit the Refresh button.

After it is done the software leaves its test files on the medium. You can erase them if you like or verify them again -- if it's a USB stick for instance with another PC.

The check box "endless verify" does just that: It puts the verify routine in an endless loop that stops only if an error is found. This is meant to be used as a long-time test to find sporadic data transfer errors.

A remark on the estimated time remaining: For intact flash memory the estimate should be pretty exact since it has a constant data rate. With defective media we have seen massive drops in the transfer rate resulting in the estimate increasing instead of decreasing. Hard drives are slower on the inner tracks than on the outer tracks so when testing a hard drive the estimate is never precise.

What to do in case of errors
If H2benchw finds errors while verifying the data it means that the
media has not returned all data exactly as it was written. It is
likely that the media is defective, but there are other possible
causes for data corruption. In case of error you should therefore
repeat the test and
  • Format the media immediately before testing
  • Don't use USB extension cords
  • If testing USB or FireWire devices, try a different port (sometimes USB ports at the back of the PC are better than those at the front)
  • For exteral drives try another cable if possible
Error messages
When the verifying process detects any errors it outputs some statistics differentiating the various error types:
  • sectors that have been overwritten by others due to addressing errors (see above)
  • sectors that have been altered only slightly (less than 8 differing bits per sector)
  • completely corrupted sectors.
In the case of overwritten sectors H2testw tries to find out how much real memory exists in the overwritten area and outputs that amount as "aliased memory" (no guarantee here).

Finally it outputs the offset of the first error with regard to the total amount of test data along with the expected and found value atthat offset.

Hint: You can copy&paste the error message, for instance to send it in an email.

Typical errors
The test data of H2testw is made up so as to be able to discern certain typical errors. There are three types:
  • Addressing errors: When writing a sector its contents are not written to the correct address but overwrite another sector. We have seen this error on certain manipulated USB sticks. It also happens if you use a hard drive larger than 128 GByte on a machine whose BIOS or OS doesn't know about 48-bit addressing. In this case all addresses are taken modulo 128 GByte. When crossing the 128 GByte boundary you overwrite data at the beginning of the drive.
  • Data is not saved at all. We have encountered this with defective USB sticks. Instead of the data written to it a sector returns only ones or zeroes when reading it. This is typical when accessing nonexisting memory.
  • Only few bits of data are changed. That might happen if the connection between the PC and the storage media is faulty.

Technical details about the test data

H2testw writes data in chunks of 1 megabyte. So even if you choose to completely fill the media you will end up with up to 1 megabyte of free space. Although technically not correct H2testw uses the Windows convention that 1 MByte equals 1024 KByte or 1,048,576 Byte.
In order to avoid problems with the 4 GByte limitation of the FAT file system, H2testw begins a new data file after each gigabyte (1024 MByte).

Inside a data file each 512-byte sector begins with a 64-bit word (8 byte) containing the offset with regard to the whole data set. It is stored in little-endian format, least significant byte first.

So the file 1.h2w begins with

00 00 00 00 00 00 00 00,

the next sector with

00 02 00 00 00 00 00 00,

the next with

00 04 00 00 00 00 00 00

and so on. The file 2.h2w begins with

00 00 00 40 00 00 00 00

(offset 1 GByte = 0x40000000).

The rest of each sector is filled with a pseudo random number sequence using the offset word as a seed.

DOWNLOAD HERE

H2testw -- by Harald Bögeholz / c't Magazin für Computertechnik
Data integrity test for USB sticks and other media
Version 1.4, Copyright (C) 2008 Heise Zeitschriften Verlag GmbH & Co. KG

Multi Image Downloader 1.1.2.2

Multi Image Downloader takes advantage of the magnificent Google Images search engine to seek out and download images without having to work through multiple sites to get at the original images.

This program will parse Google Images pages for source image references and download, in a very short time, up to 5 pages or 100 images. The actual time will depend on a number of factors but with an 8MB broadband and 100 average images it should take about 15 seconds.

Once downloaded, you can then easily scan through the images with a graphics program.

While the program can identify when images cannot be downloaded, it will download any available file that has the correct name. Be aware that it may not be what it claims to be - HTML doesn't care too much about extensions, only content. The graphic extension may well hide a bit of HTML with a script, which is why your graphics viewer can't find the header! It will probably be a message concerning availability of the file but may be something more!

Installing

Multi Image Downloader is a single exe file. Extract this file and the exe file to a folder. I suggest you copy the exe file and paste a shortcut on your desktop. Multi Image Downloader creates an INI file to hold program setting in the same folder as the exe file.

Uninstalling

Delete all files. No changes are made to the registry.

1.Setting up the search URL.

Multi Image Downloader uses the search URL that is created when you use your browser to search Google Images. Multi Image Downloader is not required until after you set up the search in your browser.

Open Google Images in your browser.

Search for your subject. You will get the first page of images.

Set any options for size, type colour etc, then press Search Images again.

You will now have the first page of images and the search URL in your browser required to run Multi Image Downloader. You can now hide your browser.

2.Open Multi Image Downloader.

Click on Set folder to select the download folder you want if you have not already done so. You can create a new folder. If need be, edit Image formats. The Download button will not be enabled unless you have a folder to download to.

Click on Get URL. Most browsers (IE, FireFox, Opera, Mozilla) will provide the URL and it will appear in the edit box. If your browser doesn't, try dragging the URL from your browser into the box. If that doesn't work then you are left with copy & paste! The Get image links button will not be enabled until you have a URL.

Set the number of pages you want. There is a maximum of 5. ( I thought I should put a limit on it or someone was bound to see just how many images they could download at one time before the search engine objected!). I understand there is a limit on how many images you can download at one time but I don't know how many; 1000 has been suggested.

Click on Get image links. If you have a correctly formed search URL, the program will download and extract image references from the current page shown in your browser and succeeding pages and list the links in the top list box. Each time you click on Get image links, the program will clear the list box and search through the next set of pages for image links.

Checking the Block HTML files box will attempt to filter out non-graphic files by testing for HTML script. It is a crude weapon and will block most non-graphic files but it will slow the download.

Once all links have been found, you can click on Download.

Multi Image Downloader uses threads to download files, in effect all files are being downloaded in parallel - the reason why downloading is normally quick. Successful downloads are listed in the middle list box and failures in the bottom list box. You may find one or two threads not completing as quickly as the rest. There is a time-out on a request and eventually the thread will complete. Try not to terminate the program while there are uncompleted threads.

You can elect to have Multi Image Downloader stay on top or not.

3.That's it.
You can now Open folder and view your downloaded images.

Google and Google Images™ are trademark properties of Google Inc
It is possible that Google will change the search line in the future. In which case this program may no longer work.

As far as I am aware, this program will work with any Google IP address and any language. If it doesn't I'd appreciate an email.

DOWNLOAD HERE

BluetoothView v1.31

Description

BluetoothView is a small utility that runs in the background, and monitor the activity of Bluetooth devices around you.

For each detected Bluetooth device, it displays the following information: Device Name, Bluetooth Address, Major Device Type, Minor Device Type, First Detection Time, Last Detection Time, and more.

BluetoothView can also notify you when a new Bluetooth device is detected, by displaying a balloon in your taskbar or by playing a small beep sound.

Versions History
  • Version 1.31 - Added command-line option for sorting (/sort).
  • Version 1.30 - Added command-line support for saving Bluetooth devices list to a file.
  • Version 1.25 - Added 'Speak the following text when a new bluetooth device is detected' in advanced options. When this option is enabled,BluetoothView will speak the desired text by using Windows SAPI when a new device is detected.
  • Version 1.20 - Added 'Try To Connect' option. (See below)
  • Version 1.15 - New Option: Execute a command when a new Bluetooth device is detected. (In 'Advanced Options')
  • Version 1.11 - Added update rate (low/medium/high)
  • Version 1.10 - Added 'Company Name' column (see below)
  • Version 1.06 - Added new option: Select Another Font.
  • Version 1.05 - Fixed bug: The main window lost the focus when the user switched to another application and then returned back to BluetoothView.
  • Version 1.04 - Fixed bug in saving as comma-delimited file when description or name fields contained comma character.
  • Version 1.03 - Added support for saving as comma-delimited file.
  • Version 1.02 - Added 'Automatically Set Device Description' option.
  • Version 1.01 - Added 'Remove Selected Items' option. (The removed items will be considered as new in the next time that BluetoothView detect them)
  • Version 1.00 - First release.
What can you do with BluetoothView ?

If you have neighbors or family members that use a cellular phone with Bluetooth turned on:
  • You can easily know when they come home and when they leave, by using the 'First Detected On' and 'Last Detected On' fields.
  • Each time that a new device is detected, BluetoothView automatically displays an alert as a balloon in your taskbar. This means that you can detect when your neighbors/friends/family members are coming even before they knock on your door...
System Requirements
  • Bluetooth Dongle and device driver that works with the standard Bluetooth module of Windows XP/Vista/Windows 7.
  • Windows XP/SP2, Windows Vista, or Windows 7. Other versions of Windows don't provide a build-in support for Bluetooth, and thus BluetoothView cannot work with them.
Start Using BluetoothView

BluetoothView doesn't require any installation process or additional DLL files. In order to start using it, simply copy the executable file (BluetoothView.exe) to any folder you like, and run it.
A few seconds after you run it, BluetoothView will start to gradually display all detected Bluetooth around you.

The 'Company Name' Column

Starting from version 1.10, BluetoothView allows you to view the company name of each BluetoothView device. The company name is determined according to the Bluetooth address. However, in order to get this feature, you must download the following external file, and put in the same folder of BluetoothView.exe: http://standards.ieee.org/regauth/oui/oui.txt Be aware that you must save it as 'oui.txt'

The Description Column

In addition to the name of Bluetooth device, you can set your own short description to allow you to easily detect the device in the future. The description that you set will also be displayed in the taskbar balloon, when the device is detected as a new one.
In order to set a description, double-click the desired item, and in the 'Description' field, simply type the description text and click 'OK'.

Connecting To Bluetooth Device

Starting from version 1.20, BluetoothView allows you to connect the desired Bluetooth devices. BluetoothView doesn't send any information to the device, it only tries to connect the device for testing purposes, and then closes the connection.
When you choose the 'Try To Connect' option, BluetoothView automatically send a connection request to the selected devices. On the device, you should get a qesution like "Do you want to accept data from xyz". If you choose yes, the connection will be succeeded. Otherwise it'll be failed. The connection result is displayed in the 'Connection Result' column

More Tips For Using BluetoothView

You can use the 'Hide Main Window' option for hiding the main window of BluetoothView. When you want to show back the main window, simply double-click the tray icon. While the main window is hidden, BluetoothView will display a balloon alert on each time that a new Bluetooth device is detected. If you want to clear all current Bluetooth devices that are currently displayed and start the Bluetooth detection from the beginning, simply use the 'Reset' option.

Command-Line Options

You can use the following command-line options for saving Bluetooth information to a file, without displaying any user interface. Be aware that you have to wait around 15 - 20 seconds until the file is saved.

/stext
Save the list of Bluetooth devices into a regular text file.

/stab
Save the list of Bluetooth devices into a tab-delimited text file.

/scomma
Save the list of Bluetooth devices into a comma-delimited text file (csv).

/stabular
Save the list of Bluetooth devices into a tabular text file.

/shtml
Save the list of Bluetooth devices into HTML file (Horizontal).

/sverhtml
Save the list of Bluetooth devices into HTML file (Vertical).

/sxml
Save the list of Bluetooth devices into XML file.

/sort
This command-line option can be used with other save options for sorting by the desired column. If you don't specify this option, the list is sorted according to the last sort that you made from the user interface.
The parameter can specify the column index (0 for the first column, 1 for the second column, and so on) or the name of the column, like "Address" and "Description". You can specify the '~' prefix character (e.g: "~Major Device Type") if you want to sort in descending order. You can put multiple /sort in the command-line if you want to sort by multiple columns.

Examples:
BluetoothView.exe /shtml "f:\temp\bt.html" /sort 2 /sort ~1
BluetoothView.exe /shtml "f:\temp\bt.html" /sort "Major Device Type"
/sort "Minor Device Type"

/nosort
When you specify this command-line option, the list will be saved without
any sorting.

Translating BluetoothView to other languages

In order to translate BluetoothView to other language, follow the
instructions below:
1. Run BluetoothView with /savelangfile parameter:
BluetoothView.exe /savelangfile
A file named BluetoothView_lng.ini will be created in the folder of
BluetoothView utility.
2. Open the created language file in Notepad or in any other text
editor.
3. Translate all string entries to the desired language. Optionally,
you can also add your name and/or a link to your Web site.
(TranslatorName and TranslatorURL values) If you add this information,
it'll be used in the 'About' window.
4. After you finish the translation, Run BluetoothView, and all
translated strings will be loaded from the language file.
If you want to run BluetoothView without the translation, simply
rename the language file, or move it to another folder.

License

This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you
distribute this utility, you must include all files in the distribution package, without any modification !

Disclaimer

The software is provided "AS IS" without any warranty, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The author will not be liable for any special, incidental, consequential or indirect damages
due to loss of data or any other reason.

DOWNLOAD HERE

BluetoothView v1.31
Copyright (c) 2008 - 2009 Nir Sofer
Web site: http://www.nirsoft.net

XLCalendar 1.7.0 Free Calendar Software

Calendar can be set up using application on the computer, so the result can be print out on paper or other application out put. Out put on other application, one of them is Microsoft Excel Spreadsheet format.

To create an output in Microsoft Excel Spreadsheet format we need support application that called XLCalendar. This application is a Calendar Tool base on template that support various calendar type, customize calendar on user needs, support special event information or event or holidays and calendar design on Microsoft Excel.

User can create a calendar on their own language, holidays, format, layout, calendar style and other additional information. Use this application on minimum Windows 98 and Microsoft Excel 2000.

DOWNLOAD HERE

Bump Top, Free Desktop Makeover

BumpTop™ is a fun, intuitive 3D desktop that keeps you organized and makes you more productive. Like a real desk, but better.

Minimum Requirements:
  • A 32-bit or 64-bit version of Windows XP, Windows Vista or Windows 7, with latest service packs.

  • A Pentium 4/Celeron 1.8GHz or Athlon XP/Sempron 2200+ or desktop/mobile equivalent.
  • Minimum 1GB system memory.

  • 15 MB available hard disk space.

  • Intel 915 integrated graphics or Nvidia GeForce 6200 or ATI X300 or better with updated drivers. The video card is the biggest determinant to performance, NOT your CPU.

  • OpenGL 2.0 driver support required (may require additional drivers available at bumptop.com/drivers).

  • Internet connection required for activation.
DOWNLOAD & MORE FREE SOFTWARE HERE @ Free Software